 
Main Menu
|
|
Nevada Classics
|
|
Advertise at CC
|
| S |
M |
T |
W |
T |
F |
S |
| 1 |
2 |
3 |
4 |
5 |
6 |
7 |
| 8 |
9 |
10 |
11 |
12 |
13 |
14 |
| 15 |
16 |
17 |
18 |
19 |
20 |
21 |
| 22 |
23 |
24 |
25 |
26 |
27 |
28 |
| 29 |
30 |
31 |
|
|
|
|
|
|
CC Advertisers
|
|
|
|
|
|
|
|
|
For Sale By
|
Views
|
Date Posted
|
|
MikeyP
|
3977
|
Sat May 21, 2016
|
|
|
|
|
Asking Price
|
Condition
|
|
$9,500.00
|
Excellent
|
|
|
|
|
|
|
|
Description:
|
1992 Classic Roadsters Cobra 427 roller. Wider and longer than the original Cobra for more interior space, more leg-room and lower seat position. Wider doors for easier access. Same classic lines as original. Ordered as an advanced assembly "roller" and built by Classic Roadsters in Fargo, ND before the original company folded in 1992. No amateur work on car. Chassis complete with Mustang II A-arm front suspension with rack & pinion steering and Fox-body style 4-link coil-spring rear suspension with 8.8" Ford traction-lock axle and 3:55/1 gears. Four corner ride-height adjustment with 1/2" ratchet handle. Front disk/rear drum brakes with lines/master cylinder/pedal installed. Fuel tank and lines installed. Fiberglass body mounted with hood, doors trunk hinged and all holes/openings for lights, wipers, bumpers, etc. pre-cut/drilled (except roll-bar). Comes with GM tilt steering column, seats, carpet, door panels, optional console, wipers, etc. Not included: windshield, door handles, roll-bar, header side-pipes, bumpers, soft-top, lights, wire harness, gages, engine, transmission. These parts were never delivered or purchased however, parts from other suppliers will fit this car. Comes with wheels and tires (BFG) shown in photo. Stored in climate-controlled garage since 1992. Has MCO. Car located in Maryland suburbs of Washington, DC (20748). For sale; Best Offer. Contact Mike for details 240-285-6012 or mpilecki@verizon.net.
|
|
Keywords:
|
Cobra Classic Roadsters Replica Kit 427 Roller
|
|
|
|
|
|
Author
|
|
jtubbs
CC Member
Registered: May 2016
Location: Fairview
Posts: 34
|
|
Comment Date: Sun June 5, 2016
|
|
Could you give me a price range--don't have a clue as to making an offer
jan
tubbsjan@gmail.com
|
|
|
|
MikeyP
CC Member
Registered: May 2016
Location: Temple Hills
Posts: 5
|
|
Comment Date: Sun June 5, 2016
|
|
Hi Jan,
I paid $18K including $5K for the advanced-assembly option (roller) and the lowest offer I will consider is $10K or $11K including the drive-line parts I have; 351W roller-cam block fully machined .030" over with stud girdle, 351W GT-40 iron heads, Edelbrock Performer RPM intake manifold, Holley 750 CFM double pumper carb, C-4 automatic trans. Thanks for checking! Mike.
|
|
|
|
|
MikeyP
CC Member
Registered: May 2016
Location: Temple Hills
Posts: 5
|
|
Comment Date: Fri June 17, 2016
|
|
Price reduced to $9,500 including drive-line parts
|
|
|
|
|
FlaCobra
CC Member
Registered: May 2016
Location: Loxahatchee
Posts: 6
|
|
|
|
|
|
All times are GMT -7. The time now is 10:10 AM.
Links monetized by VigLink |
