Quote:
Originally Posted by sambo
Thanks for the info Baz. I've made the same mods to my MX5 seats, except the headrest is standard height, so that will be a problem. I might try to remove 70mm out of the seat padding - I assume the measurement is taken from the top of the headrest to where your backside makes contact?
|
Sambo,
My interpretation of the requirement is,
"The measurement is taken from an imaginary line drawn from the highest part of the seat where your bum goes, which in the majority of cases, would be the front leading edge, to the back swab parallel with the floor."
Hope this explains it adequately.
Baz