[priobe]

ok question.

Let me take this back to basic (at least for me).

RIck or any one else out there.

I put the Dove assembly back together after cleaning up the shafts and rockers. I placed the rockers assembly on the heads.

Question #1
When mounting the rocker arm assembly, with the adjustment screws all the way pulled back, should the stands be resting (flush) on the heads. Or should you have a .125 (1/8) inch gap on a couple of stands.

Question #2

If the camshaft lope is up, the pushrod is up, the adjustment screw fully lossen, should you have clearance on the rocker. Or is this normal.