Quote:
Originally Posted by dlampe
The cam that I have is a Hydraulic roller Dur. @ .050 is 246-I and 255-E, Lobe seperation angle of 112, dur. @ .006 303-I, .311-E, 108 Intake center angle. Gross lift .654 and .649.
It's a big one. Can I get by with that and webers?
|
Dean, my cam specs are almost exactly the same, as well as Rokndad's (Tom) on his CSX4758. While not ideal for Webers, Webers will run fine on our cams or so I'm told.