Quote:
Originally Posted by bdeutsch
All, is it feasible, once a CSX roller is purchased, to actually install the engine and drivetrain yourself (with knowledgeable friends helping of course)?
In the last couple of weeks or so, there have been some strings on the lack of a manual for the CSX cars which is leading me to believe that the above plan perhaps is not feasible. Not sure how one could do this without some understanding of how things are wired, positioning, etc.
Have any current CSX owners on the Board added the drive train and engine on their own or have the majority contracted the job to CSX referred specialists?
Thanks,
Bob
|
Bob
I installed the drivetrain in my CSX with no problems.
Let me ask a question. Would you feel comfortable pulling and replacing an engine in a car? If so, there's nothing special about dropping an engine/tranny into a Cobra.
The others are right - ask a dealer about a "Runner Kit". Give Shelby dealer George Anderson at Gessford Machine in Nebraska a call. He's a great guy, and a straight shooter.
Here's a pic - all you need is a few good friends......