Quote:
Originally Posted by PANAVIA
BMWMECH do you have a print to go off of >?
I am sure we could come up with measurements for you if needed.
|
Actually, I have a set of prints I drew up by scaling up the MPC 1/16th scale plastic kit, but they only get me so far. Most of the detail stuff I have been referencing using the Kirkham website, but again, it only gets me so far. One of the main reasons I joined this site was for reference and the feedback I've gotten so far has been great, but alas, I still have no solid dimensional info. A good example of bad info is the front of the main tubes, which another member pointed out in an earlier post, sticking out too far past the front suspension centerline. On the model I scaled, they do sick out that far, but on the Kirkham site, I noticed they are alot shorter. Not a big deal to change them and it won't alter the wheelbase, but they need changed. Also the lower tubes are indeed too straight, so those need changed, as well. The more info I have the better, so any help is much appreciated! Thanks for your input and keep checking back for updates...
Garey