Not Ranked
Hi Olaf What are you going to do with this car? Roller cams are nice for out and out racing. On the street it is not needed Your engine builder should tell you a good cam for the engine you are building and the driving you are going to do. You need to call around and get prices from all over. I built an alum. Shelby motor for 12,500.00$ I assemblyed the top of the motor myself. the short block was assembled by my machinist. The bottom end was blueprinted and balanced. Get a price on arias pistons. Hydro lifters are nice and do not need alot of adjustment after the motor is set up. You didnot say how much horsepower you wanted, so I would start their. I think must people building cobras learn that the hard way. Hope this gets you heading in the right direction. ASK QUESTIONS TO AS MANY MEMBERS ON CLUB COBRA AS POSSIBLE!!! Then make a choice. Good Luck Rick Lake
|