View Single Post
  #4 (permalink)  
Old 04-01-2010, 07:15 AM
Tom Wells's Avatar
Tom Wells Tom Wells is offline
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Mar 2000
Location: St. Augustine, FL
Cobra Make, Engine: E-M / Power Performance / 521 stroker / Holley HP EFI
Posts: 1,933
Not Ranked     
Default

MOTORHEAD,

I have an E-M. I think it's a Series 3

It has Jag 3.8S rear axles and wishbones with four Aldan shocks. Not sure what you mean by "suspension specs" but if you can be a bit more specific I'll try to help.

My front suspension is Mustang II with a 1993 power steering rack and Aldan shocks. I believe the higher numbers are stiffer settings on the shocks. Keep in mind that with the single adjustment Aldans, the only adjustment is for rebound. If you have the double adjustables, then it's both ways.

I have a single master cylinder with power brakes so no help on balance bar; I use one master cylinder and a manual proportioning valve. My fronts are 13" Mustang Cobra brakes. The booster is from a Subaru. Works well.

Dunno if this helps,

Tom
__________________
Wells's law of engine size: If it matters what gear you're in, the engine's too small!
Reply With Quote