[olaf herrick]

Thanks a lot for the information, I posted this thread on the FE forum also and I appreciate George answering on both forums. I took all the info I gleened here and on the Fe forum and asked my local speed shop . Per your advise I posted earlier that I ordered Arias forged pistons. I also decided to go with a solid lifter cam I have a setup like this in my Boss 302 Mustang and I have had little trouble. My wavering was because the motor when I bought it already contained the roller cam, lifters,springs and rockers but the machine shop I'm using found some abnormal wear and suggested I replace the lifters and cam. So thanks again and sorry about the redundancy.Olaf