Quote:
Originally Posted by lovehamr
David, it could turn out to be a very cool motor. What cam are ya'll planning on?
Steve
|
Right now it's got an old grind from Crane in it,hydraulic flat tappet, 484 lift, 272 duration, advertised as a 4x4/towing camshaft, very good bottom end torque, good from 1500 to 5000 rpms.
I'd like to see him go up to a cam in the low 500 lift, with no more than around 280 duration, but for now, plans are to re-use the same cam unless some $$$ gets freed up for another cam....
David