Quote:
Originally Posted by trularin
Who is doing the engine?
I have and will give a complete FE ( 360 ) to a machine shop.
It is almost complete. But for all intensive purposes, it could easily be punched to 406 - 428 slugs. The heads are truck smog style, but I can toss in a set of 6040s.
Here is the problem, Either it is going to have to be some place close to Detroit, OR there is going to have to be an effort to get it shipped.
 |
Wow, that's an amazing offer, thanks so much. I think I'm ok in the engine department, but I may need to replace the heads that I have for it. What are 6040's? I'm not all that familiar with the FE head numbers. I have D2TE-AA heads. I am told that the exhaust port in these heads is in a different location in reference to the header mounting bolts, which results in an inability to seal with the thin sealing ring on the headers. If this is true then I will need heads, I suppose. Thanks again for the kind and generous offer!
Doug