Quote:
Originally Posted by rscocca
Hi Doug,
I have a quick fuel carb, FFR black painted side pipes, steel braided oil cooler lines and AN- fittings. Wilwood Masters and clutch masters, flex lines from masters to slave. Just tell me what you can use and I'll drop them at the house. |
Bob,
Wow! As if you didn't do enough by stopping by to help a total stranger put the body on the car, now you're donating parts! Guys, I asked for some local guys to stop by one Saturday mornong to help me lift the body onto the car so that Nick could take it. I'd never met Bob before, but he drove 40 minutes early one Saturday morning to help a guy he never met. One other local guy dropped in, and with the help of a neighbor we had the body on the frame rails in minutes flat. Bob, thanks so much for that and for offering up all these great parts. I can't use the sidepipes but I can probably use the rest. I'm not sure what size my clutch master needs to be, but I know I need a .625" remote reservoir front master and a 3/4" remote reservoir rear master. If that's what you've got than that would be great. The lines, carb, etc would be wonderful too! I can't thank you enough for the perevious help and for this as well. You've been wonderful to me, thanks so much.
Doug