Not Ranked
[quote=Rick Parker;1073123]Generally the standard valve reliefs that are made in the pistons (forged pistons) are sufficient for most off the shelf Hipo cams. The piston will be chasing the exhaust valve more agressively than the intake and will need more attention. [/QUOTE
Rick, that's exactly what I've heard. I was really surprised to see the impressions in the pistons were on the intake side.
The old cam was a Performer RPM, I did not expect any problems with the valve reliefs.
Any advice on the connecting rods? I assume they could be bent, but how to check this? A slight bend in the rod might be hard to see...
|