Not Ranked
The set of pistons I have here is for a 4.375 bore with a 6.8 rod and a 4.125 stroke. I have rods and maybe the crank too - dedicated to another build but duplicatable. Maybe we can find you a "rental" engine.
Brett - the 460 parts wont work out. The valve pockets are way wrong - many 460 slugs have no exhaust pocket at all and the underside of the piston does not have the meat to allow putting an FE pocket in there without hitting daylight. Tried that once upon a time.... BBC pistons can sometimes be made to work.
__________________
Survival Motorsports
"I can do that....."
Engine Masters Challenge Entries
91 octane - single 4bbl - mufflers
2008 - 429 cid FE HR - 675HP
2007 - 429 cid FE MR - 659HP
2006 - 434 cid FE MR - 678HP
2005 - 505 cid FE MR - 752HP
|