Not Ranked
Update on my Cobra upgrade. I pulled the 302 out and installed the FE using the motor mounts that came with the used headers. The motor bolted in perfectly, but the driver's side header hits the foot box and the engine would have to come forward 1 1/2" to allow clearance between the header and the footbox. This also makes the headers too far forward for the sidepipe opening on the body. I contacted Stainless Works here in Ohio and was quoted $2400.00 for a set of one-off headers. So unless I can come up with another solution The 302 is going back in the car for another year.
|