Not Ranked
Excellent post Craig ... Point 5 (solid insert) for initial fab of the mount is very important. We spun up an alloy insert.
Another point I would make is ensure the side cheeks of 1/2 mount without the urethane bush is at least the same diameter as the OD of the bush.
In other words the whole urethane bush is covered at the ends.
Zedn, rather than purchase lower control arm bushes you might try whiteline for the replacement bushes for their mounts.
__________________
It's impossible to soar like an eagle when you're surrounded by turkeys.
Last edited by Rebel1; 03-20-2011 at 01:54 AM..
|