[Stephan427SC]

Cashburn,
After installing the Inglese 8stack-system, I decided to go the 50° timing-route with the FAST XFI-system, so that I can adjust each bank.

I started my engine and checked the timing with the timing-light at idle . It's exactly 50° at 1.000 rpm.

Then I connected my pc and started C-ComWP XFI . I pressed the F9-Key so that I can see all sensors. In this window I can see the "Spark (*BTDC)". It reads 26,9° at idle.

ROUSH recommended for my 427R engine 16° @ idle 900 rpm.

So will I have to adjust this ? If so, where and how will I have to do this ?

Thanks from germany,
Stephan