[ERA Chas]

Be very careful about buying these.
Good:
They are mag.
Part #'s are correct (if they're cast into the spokes).
Bad:
Originals for Cobras are 6 pin drive-don't know about Vettes and adapters. Never knew there were any such.
The pic against the garge door shows 4, 7 1/2"- not 2, 7 1/2 and 2, 9 1/2.
Don't like the reliefs drilled between the pin holes-not as original for Cobras. Possible source for cracks.
Caveat emptor.