Thread: Bolting on a different head
View Single Post
  #1 (permalink)  
Old 06-25-2011, 06:57 AM
RET_COP's Avatar
RET_COP RET_COP is offline
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2009
Location: Westerly, RI
Cobra Make, Engine: Fordstroker 408w custom solid roller-Craft ported Brodix 17*heads-CFM ported Vic Jr. intake-1 3/4 primaries- 575hp-TKO-600RR Liberty upgrade- -Moser 8.8 trutrac-McLeod Street Extreme--QA-1-Wilwood brakes, Classic Chambered 3" Cobrapacks, Avon's
Posts: 645
Not Ranked     
Default Bolting on a different head
I want to put a different head on my engine, just an easy swap. I currently have World Products roush 200s [windsor sr.]. My cam is a compCam xe284H. Can I bolt on victor Jr.s with the 2.05 in valve , or the 18* KC Brodix signature heads without having a valve to piston issue?
I also have 10.5:1 compression with 64cc and a 58 to 60 cc chamber would be a nice increase. I have cylinder pressures in the low 160s.
Any advice would be appreciated
Lou
__________________
Lou
Reply With Quote