Andrea I'm posting some pics to show you how the cool-air pipe is mounted. It's very simple yet amazingly effective. I was running some gauze over the pipe opening to start with but it interfered with the air flow so, it's gone and nothing nasty has been dumped on my feet yet!
Here's the intake at the top of the slot.
Running up behind the headlight.
Along through the wheelarch.
Coming back into the engine bay. (Tidying this up is on my to-do list!)
Down through the top of the footbox. Note I've also wrapped part of the throttle linkage to prevent heat soak down to the pedal.
And because the BB Chevy in my Arntz is set
way back, I've lined both footboxes inside and out with insulation material and the headers are wrapped too.
Don't forget to do the passenger's side too!