Not Ranked
Our CMC car was built 93/94,frame was set up for tubular uppers and lowers front and back with clearance for belly exhaust, 2600 lbs.
460 .030 over forged pistons
new beam rods arp 2000 bolts
balanced and blueprinted
Aluminum heads ported and polished
Lunati flat tappet .235 @.050, .560/.560
Edelbrock RPM
Dan Davinci 1000 cfm dbl pmp Holley
Mallory Unilite
aluminum water pump
Tubular Automotive custom racing headers
Stainless Specialties mufflers
Aluminum flywheel
Clutch pressure plate balanced with flywheel
Tremec TKO 5 speed
Strange aluminum center section 9" with 3:73 gear 31 spline moser axle,Traction-Loc
posi set up tight
Coilovers all around and car has been scaled
12" Wilwoods dual masters with balance beam
Have road raced the car and a little street/drag race when the need arises.
This car could be driven year round with top and windows in but do not.
Car just sitting still pushes the right buttons as you all know.The very first magazine article I read about the 427 Cobra back in the 60's have lusted over these beasts ever since.
|