Quote:
Originally Posted by mickmate
John you need to machine the thread length of the knockoffs off the back of the front wheels and drill the pin holes deeper. Wheel offsets are given in the manual.
|
Yes, that's what I'm starting to figure out. The offset is about 3/4" off from what the book says. That would give me plenty threads for the knock offs. After looking at the Trigo web site and they only offer 1 offset, I sort of figured it out that I needed to have them machined down. Thanks for verifying the fix for me. I knew that I could count on one of the board wizards to chime in. Thanks again.