I have a neighbor with a 2006 Mark III and I have a 2010 Mark III. I wanted to use the Shelby Motors license plate frame with the blue background that he is using, but it would not fit between the license plate light and the trunk handle. After measuring the two cars, the distance between the license plate light and the trunk handle is approximately 1/4" longer on his car than on my car, thus the frame fits his but not mine. The trunk handle and the license plate light/license plate hold look the same between the two cars. One would think that the mounting holes between the two cars would be in the same location by a jig during construction
or is there an adustment that can be made to pick-up the additional 1/4". By the way, I have tried other license plate frames including the one with a narrow edge; they all have the same problem. Comments.