Quote:
Originally Posted by patrickt
Thanks. You can see from my pics that I had fashioned some absorbent gasket-like material for the top of the cans, but the angled can for the clutch sloshes out more than the others and actually soaks that gasket -- and I don't really have much fluid in there, either. That rubber liner could be mucho perfecto.  |
I run 3/4 fluid levels with no issues. What little bit of wear my cans show on the top ledges is prior to installing the gaskets. And I am using the original Girling lids and $7 Home Depot PVC glue cans epoxied black. And I crank the lids down hard.