well...I finally got my 5.0 roller motor +0.030 bore, SRP pistons, Scat stroker, Canfield 195's with 58cc chambered heads, Cometic head gasket, Comp extreme energy cam, Vic Jr. intake with a ProSystems 4150 carb in my car and on the dyno...371 HP at 5800 rpm's dropping a few cylinders on the pull and still climbing....
need to get some new plugs, gapped at 0.042, a 6500 rpm rev limiter chip, and a little leaner air jets...then back to the dyno. What a difference over a 302 345 hp crate! also fixed the slip fit headers to flanges, and put a quicktime bellhousing....a happy camper