Quote:
Originally Posted by *13*
I know I knew this at one point & now I've forgotten... I'm trying to write down, again, what I had done with my Jetting before my computer died & took the info with it. I pulled my jets to write everything down again. The only piece of info I don't have now is the sizing on my Idle jet holders. I know I soldered them, they were 120. I have a set of 100's on the shelf so I'm assuming they are set at 110. How do I check this?
|
So they were 1.20mm and you soldered them but you remember how you made them between 1.00 and 1.20?
Buy a metric drill set from 0.3mm to 2.00mm.