Not Ranked
Have a look at the products from POR15. Lots of Cobra guys have had good results with them.
Personally I would not reccomend powder coating for this area. The problem with Powder coating is that it can chip and when it does usually a big chunk falls off. The coating is nice but any coating is only a stong as it's bond to the material under it. With the stones and junk flying round under the car it will get chipped and leave an area of bare metal exposed to the elements.
Many of the new paints out there like POR15 will have a better bond with the surface than powder coating.
Cheers
Cheers
__________________
Mike Murphy
Melbourne Australia
|