View Single Post
  #2 (permalink)  
Old 06-16-2012, 08:28 PM
Mark Brye's Avatar
Mark Brye Mark Brye is offline
CC Member
Visit my Photo Gallery

 
Join Date: Mar 2006
Cobra Make, Engine: BDR354/FMS392
Posts: 382
Not Ranked     
Default

I have#354 with the stock 17's. There is no way I could run a 335 on the rear with the factory 17's. It would kiss the outer fender (I run the car pretty low in ride height).
But, I also have 17x11 American Racing 427 wheels with 6.5 backspacing in the rear with 335's and they clear no problem on the inside and outside. There is room for wider than 315's but you have to work with the backspacing. At least on my older build....

I think stock was 17x10.5 with 5.75 back spacing. Not sure if the new cars are the same.
Reply With Quote