[my427cobra]

A few pics of my Street Roadster undercar exhaust as I was putting it together.

My car is an NAF and I'm running a 351C with Edelbrock Al heads and a custom made 2X4bbl carb set-up.

2 1/2" Polished 304 SS from headers to exhaust tips.

Tucked along side frame rails, over the rear axle to muffler under rear quarter panel and tips out past rear bumper.

Mufflers are Stainless Specialties (I need to polish them yet) 4"OD and 2 1/2" inlet/outlet.

Blue tape where the cut and mitered pieces were to be welded.

Also a pic of my ceramic coated headers (Schoenfeld IMCA headers that come of the heads horizontally instaed of pointing down so I had no frame clearance problems) and SS down pipe.

Greg