Quote:
Originally Posted by undy
6K rev limit for my KC Pond 482.
Short of a very light weight rotating/valve train assembly...or... with a solid flat tappet or solid roller 6K is about the limit.
|
agreed on the solid cam and roller......but factory valvetrain and bottom is fine up to 6500.........lots of dragstrip time with factory parts in the past. at one time factory nut and bolt rods and valvetrain were all there was to use unless you had very deep pockets.
if running a dual plane manifold, your done at about 6200 anyway. why make more noise when the "go is gone"