[darryl370]

Thanks, Terry and Bill! I'll post what I found out in case someone else comes along looking for answers for the same parts.

I tracked it down and was able to find out some history on this. This is a custom-made boss assembly by Shell Valley Companies for all kits made prior to 2010. This boss assembly is DISCONTINUED and no longer available for purchase. They no longer make this part because of the issues: The key pin and/or bushing wears out and cause play in the steering wheel. You will have to change the steering wheel shaft and the steering wheel.

This is an 1 1/2 inch steering wheel shaft so make sure your new shaft is 1 1/2 inches too or you'll have to drill out a larger hole in the dash and do a bit of customization to make it fit. The good news is you can put a spline boss in and fix the play in the steering wheel. This part fits onto a threaded rod and has a key pin to hold it in place.

I'm working on getting my photos up but the upload feature keeps freezing on me. I promise to get them up. The previous owner did like many others - put a lot of money into performance but neglected the minor details. It runs great and I can handle this kind of stuff!~