[justcobra]

[quote=albanycobra;1095105]After cutting the body in I move onto the suspension.

I fitted the front side panels (pre cut and marked by DRB). I then polished the front Corvette C4 suspension arms, I also fitted new bushes and ball joints while at it. The front end I got from Ebay in the States and the balljoints are from Ecklers.

Fitted up the front suspension with QA1 shocks ,350 pound springs.[/QUOTE

I got brand new set of C4 upper and lower control arms from Utah USA from a well known corvette supplier.

These items were alot cheaper than Ecklers but you cannot fault their service as used them in the past.

I love to build a GT40 and these parts will come into play if I can buy /source a abandoned GT40 project.

l will be shortly receiving a set of BRM wheels previously fitted to Dave's RF 40

It is a START!