03-08-2013, 08:15 PM
|
|
CC Member
|
|
|
Join Date: Dec 2001
Location: Louisville,
KY
Cobra Make, Engine: I'm Cobra-less!
Posts: 9,417
|
|
Not Ranked
I'm usually at around 240-242 at .050" for a 6000-6200 peak with a 427 and good flowing heads.
With your heads and that cam, you're probably looking at a 5500-5600 peak or so with good torque.
I built a 425w with Vic jr heads and a Vic jr intake with a similar cam and it made 484hp at 5400 with 500 lb ft. Basically out of the box parts. This was back in 2003.
You need more carb....
|