[Pries]

Hello

I just finished to install of my new Dynaformance (Dynatek) Classic EFI system on my FE428.

I'm ready to start it up, but there is no of fuel from the injectors when I cranking the engine.? I run with 50psi of fuel pressure.

I run with MSD Digital-6 Plus CD Ignitions and built it into the wiring system as Installation manual says I can.

As I understand the green / yellow striped wire from the CFI to the white wire on the MSD?

Hope some of you can help me.

thank you

Regards
Jesper Pries-Jensen
Denmark