[fastercobra]

I don't know if that brand of spinner hub wheel is any different than any other brand, but I used to get the spinners off my Superformance by just hitting them with a lead hammer. A little trick to keeping the spinners in great shape, and also keeping your hammer free of deep gouges, is to buy some vinyl tubing (Don't remember the specific ID) and cut it into about 4" or 5" lengths. Slide it over the spinner arm, and hit the vinyl instead of the steel or aluminum spinner itself. Works great, and each piece of vinyl lasts about 4 or 5 times before needing to be replaced with new.