[blykins]

Jeff's heads are nearly completed. My porter is finishing up the details on the heads and has turned to the intake manifold.

The heads were pretty rough out of the box, but we were able to get some really stout numbers out of them.

337/341/347 j@ .650"/.700"/.750"

That's a smokin head for an FE.

The exhaust side came in at 260 cfm with a 2" pipe. That's phenomenal compared to any other wedge FE head out there that I've seen.

Jeff's cam lift is going to be between .650-.700" after lash, so the numbers at that level will support a good bit of horsepower.