[petek]

DV,

Perfectly clear and it's one of two options I've been thinking of, although I was thinking square section tubing rather than angle.

The other idea I had was to take a piece of plate steel (3/16 - 1/4) fabricated to fit the parcel shelf and then tie it onto the frame with three bolts to the square tube frame member closest to the seats and then one bolt each to the frame members near the jack screws. Tubular receivers with fillets then welded to the plate.

I dunno ... but once I've got the roll bar in hand I'll be able to cut the holes in the body and send the car out for paint!