Quote:
Originally Posted by MaSnaka
Ken,
I just looked at how my brakelines are held in place. I don't recall anything complicated or requiring modifications with the parts provided. The frame member where the OEM brakelines were held has a 3/4" hole, there is a square "C" clip that holds the line fitting in tight on the inside of the frame and the outside of the frame there is a hex nut on the flex line that fits against the hole in the frame. If you PM me your email I can send you a pic of the inside and the outside of the frame member. Hope that helps and I'll keep an eye on my PM's incase you want the pics. Good luck.
John
|
Thanks John
Sounds exactly like mine. But with the 3/4" hole, I did not like the way the outside hex fits, (where the very tips of the hex is the only thing holding).
I found my own solution, by taking two fender washers and cutting a hex shape in the ID using a dremel tool. Then welded the washer over the hex on the fitting. Now can't slip into the large hole!
Thanks
Ken