Not Ranked
I bought a full set. They were a real pain to tighten and undoing the huge nut that hold them on. The treads were binding like mad. I had to use a chain vise grip to try and remove the nut. There should some sort of a key to stop the gauges from turning. I was going to drill 2 holes in the back of the gauge and make up a bar with 2 pins to stop it rotating. I eventually had to use a thread file and silicone on the treads to make it turn freely. Wasn't happy at all.
Besides all that. I really like the look, and I got the cobra logo in the central gauge only [ didn't want to over do it] The lighting is nice with the fader.
JD
|