So another weekend and some more shed progress.
Dragged the roller door out of the weeds last week and had it roughly positioned and ready to colour this weekend. Think it looks far better than the original puce yellow.
Found some of the last outside wall sheets were too rusted at the bottom so went on the hunt for matching tin. Couldn't find an exact match but a Stramit product (K-Panel) was so close it became the pick. Helps that my youngest lad is working at a subsiduary company so I got staff discount too!
So I got two sheets on Friday and that allowed me to finish off the outside wall around to the rear. Only real bit of sunshine today and it came out as I wanted to take photos - sorry about the glare.
The remaining wall sheets are all rusted to some degree but am going to cut these just below the lower timber beam and use good segments from now spare sheets and overlap just at this lower beam. They are all at the rear so out of sight anyway.
The slow part now is just the spray painting of the sheets but I've got some leftover slightly tinted corrugated polycarbonate from a previous pergola I think I'll raid. Will save some spray time and cost nothing too.
Again it is just a storage shed but the thought went through the grey matter about some sisalation.
Thoughts on this insulation option guys?
Cheers