So had been continuing to tinker through the week most nights and making small steps forward on the driver footwell panels. And now I have a final product finished.
As mentioned multiple panels to be able fit these in and around the obstacles plus several small covers as seen below separated.
And then all the bits screwed together, as bit of a check.......
Then more importantly the whole shebang mounted into location.
The covers to hide the opening around the bonnet latch.
And a closer look around the footbox.
I'll be keen to see how the pedal room works on the accelerator when I get the chance to sit in the cabin. However I deliberately folded the panels to maintain space to the right of the pedal so that the foot could somewhat slide into that area.
Some final tinkering and fitting of LED's and this is all done.
Hope to get the gearbox cover finished this weekend too and that will be it for the cabin aluminium work.
Enjoy