Not Ranked
Can one of you ERA guy's advise me. We are working on final assembly of the rear into the car. The manual says to set the lower trailing link to 16.5". This causes all kinds of fitment issues for us, such as the rear radius arm inner pivot is reward past the mounting tabs on the cradle thus putting a bending moment in the link if we try to assemble.
15.5 " and it all goes together pretty smoothly and looks correct i.e. anti-squat at cradle, visually looks reasonable with anti-squat at lower edge of upright.
I need to make sure because of the relationship to the upper trailing link as well as several others.
I checked the latest manual and it too calls for 16.5"
What am I missing?
x-chr
|