[Scufty]

SO ..Im building a 302 ..Before everyone gets on me about aluminum heads blah blah understand that these are a bunch opf parts that I am trying to put together a engine with for minor money.

Now.
I have a 74 302 block ..it was in good shape but going .40 over with flat top Hypereutectic pistons.
stock crank was in good shape so polish and back in. rods are fine - will go with ARP bolts.
new bearings all round.
I have a set of good worked a little 351 heads from 1970. going to bolt them on and see how they are. ( I know ...just get Aluminum heads ) These are free mind you.
This is the Cam I have Ford M-6250-312 matched with lifters and springs.
then a performer intake a holley carb.

then headers (not sure what yet)

thoughts?

Thanks all who chime in