Quote:
Originally Posted by Axel 427
Thank you........I'm gonna replace the seal this weekend. How do I check the trans fluid level and how many qts does the Tremec 600 hold?
Vance
|
About 2.5 but you want to fill to about 1/4"
BELOW the side fill port. TKOs shift better at higher RPMs with a little less fluid. Tremec has even admitted this with a service bulletin.
Make up a 90 degree rod (coathanger, etc.) and wrap masking tape on the downward leg with a mark about 1/4"-3/8" and fill until the fluid shows at that mark checking as you fill.