Quote:
Originally Posted by MAStuart
Mongoose and Scratchbuilder The ends on those control arms could be brought into alignment with heat in the right place and letting it cool. Its called flame straightening . No manual bending involved. What you see there happens all the time even when it is welded in a jig. If all the jig holes were nice and tight and you fully welded your part you would probably have a hard time getting your part out of the jig. And you would have a harder time getting it back in the jig.
Mark
|
Mark if you had seen the abortion of metal that came from acton like I have on SB's control arms or any of the FUBAR crap that he sent to me you would see that the pieces were far beyond ever being straightened or aligned to anything more than scrap metal