[BOBOCobra]

Guys, there was a lot of discussion about this in many old posts but I am wondering how this turned out for those that have done this.

I have the Ford Racing 521 setup with a C6 and the mechanical rollers and I think this is a ticking time bomb with the spring pressures on the rollers/cam for a street car. I want to change over to the hydraulic rollers, new cam/springs/rockers/push rods...

I have 5000 miles on the original setup but I am going to do some other work this winter and am thinking about making this swap. Thinking a Crane cam and associated parts required.

Comments? How has this worked out?