12-28-2016, 10:47 PM
|
 |
CC Member
|
|
|
Join Date: Feb 2012
Location: Keller,
TX
Cobra Make, Engine: Lonestar Classics LS427. Self-built 408W, AFR 195 heads, Performer RPM Intake, Quick Fuel 750, 407rwhp, 479rwtq
Posts: 549
|
|
Not Ranked
All good recommendations. I eye-balled the intake and the gaskets but didn't see any specific abnormality. I will measure the intake against the heads at all four corners (top and bottom) and report that to my machinist. I remember he took off 0.006 off the block deck to square them.
I'll also check the depths of the holes in the head against the length of the intake bolts. May take 2 weeks for the turn around. Thanks for the recommendations!
|