I have sourced a place (Sharpe Products) that will Classic Roadsters Cobra Roll bars for us out of
304 Stainless Steel 2"OD x.120 wall (#4 Spun Brush Finish).
Good possibility it will work on other Cobras besides Classic Roadsters.
It should not take too much work to be able to polish it up to a mirror finish from there.
*Note that ends are to be left long for others to trim; no plates, nuts, or welding is included.
Prices are:
For 4, $350.00 a piece (
We are already at 4 right now!)
For 5, $315.00 a piece (
So the price would now be this or lower 
)
For 6, $293.00 a piece.
Plus Wi. tax (5.5%) and shipping costs.
(I will take care of boxing and packaging.)
I am really hoping that we can got another person is buy one or two to drive the price down.
Would like to place the order in the next couple of weeks so let me know.
Send me a PM or txt me at 4one4-8five2-54eight7.
If you don't have a Roll Bar or a mild steel, it's a great chance to upgrade to Stainless Steel (It's .120 wall so it's thick) for not much money.
Here is the schematic of the roll bars..
Again, good possibility it will work on other Cobras besides Classic Roadsters and will be getting a stainless steel roll bar for the price of a mild steel dom one.
