Quote:
Originally Posted by Bill D
Jim
On the 289 cars, was the vinyl on the rear bulkhead from the floor to the top? Or just partway?
Thanks
|
This is the best answer to your question Bill:
Originally Posted by rsk289
I'd also really appreciate any photos of this area if possible. I've trawled through the CSX info gallery for the 2000 series cars, and there are only a couple of shots of this area which are hard to make out. It seems this is not a popular subject for a photo when snapping Cobras!
I'm assuming the vinyl panel holding the sidescreens was flexible, with an elastic top edge?
Yes, Elastic sewn in with about a 1/2" stretch. Lift-a-dot to Lift-a-dot across the top is 40 1/2"
Was the rear bulkhead carpet or vinyl?
Vinyl
Looks like the wheelarch bulges at the sides were vinyl
The bulges covered in leather (glued)
- but the lower step going across?
"Step" is carpeted
Was carpet only on the floor?
Carpet on trans/bellhousing tunnel, kick panels, along sides below doors and on doors and glove box
Larry