Quote:
Originally Posted by Gaz64
The venting needs to be good enough to replace the fuel the engine is using at peak consumption.
So 600 hp, 300 lb/hr, 5lb/min, about 1 gallon/minute, about 4000cc/min. 66cc/sec.
Can a 1/8" hole flow that much air?
There are other ways to have to filtered air as a venting supply.
Gary
|
Gary
Very nice comment.....I especially like the calculation......and that is why we have many holes..........we are running 750 plus HP and it’s using a lot of fuel....and air....